Radarr not connecting but everything else is.

Having trouble setting everything up? No worries, we'll help.

Radarr not connecting but everything else is.

Postby lanstitch » Sat Feb 25, 2017 9:45 pm

I've got sabnzbd, my indexers, and Sonarr all connected and they all work. The only thing not working is Radarr. I've copied over the API (by emailing it to myself) twice. I've made sure that the ip adresses and port were correct. I don;t kow if there is a setting on Radarr's side I've got to set before it works but I haven't seen anything about this issue.
lanstitch
 
Posts: 4
Joined: Sat Feb 25, 2017 9:34 pm

Re: Radarr not connecting but everything else is.

Postby f3bruary » Sat Feb 25, 2017 10:33 pm

Make sure the bind address is * or 0.0.0.0.

Also check if you can access Radarr through the browser. If not, then perhaps a firewall is blocking the connection ?
-f3b
User avatar
f3bruary
 
Posts: 596
Joined: Wed Feb 26, 2014 7:12 pm
Location: /root

Re: Radarr not connecting but everything else is.

Postby lanstitch » Sat Feb 25, 2017 11:24 pm

My bind address is set to *. When I try to change it to 0.0.0.0 it tells me it failed to save general settings and tells me to switch it back to *. I can view Radarr on the host computer's browser but I can't view it on a remote browser. Whether it is on a local network or via the internet.
lanstitch
 
Posts: 4
Joined: Sat Feb 25, 2017 9:34 pm

Re: Radarr not connecting but everything else is.

Postby Kev » Sat Feb 25, 2017 11:42 pm

Check your firewall and port forwarding settings.
Developer of nzb360
User avatar
Kev
Site Admin
 
Posts: 1320
Joined: Mon Feb 24, 2014 2:29 am

Re: Radarr not connecting but everything else is.

Postby lanstitch » Sun Feb 26, 2017 12:19 am

I have disabled my firewall completely and double check my port forwarding. I now getting this error message inside NZB360 itself.
Attachments
Screenshot_20170225-191609.png
Screenshot_20170225-191609.png (116.2 KiB) Viewed 743 times
lanstitch
 
Posts: 4
Joined: Sat Feb 25, 2017 9:34 pm

Re: Radarr not connecting but everything else is.

Postby lanstitch » Sun Feb 26, 2017 1:10 pm

I re-downloaded Radarr and set everything up again. It works now. I appreciate all the help.
lanstitch
 
Posts: 4
Joined: Sat Feb 25, 2017 9:34 pm


Return to Support